M
2.44
7.13
2.00
1 1/2 HEX
1.25
M36X2.0-6H
LOCATING
SHOULDER
Source Fluid Power - Phone: 952-368-3866 - Fax: 952-448-3392 - Sourcefp.com
F16A
F16A
Flow Range:
15
0-15 gpm
20
0-20 gpm
35
0-35 gpm
50
0-50 gpm
Operating Speed:
Select letter
code from
appendix page 1.
Options:
See appendix
page 2 for
available options.
Function
Motor driven, variable orifice, restrictive type,
•
hydraulic flow control, non-pressure compensated.
Pressure balanced, bi-directional flow.
Operating Pressure
3000 psi maximum differential
•
Consult factory for higher operating pressures
•
Flow Ranges
Based on 100 PSI pressure differential with valve fully open.
See pressure drop curves for additional application data
15
0-15 gpm (Equivalent to Ø.25'' orifice at full open)
•
20
0-20 gpm (Equivalent to Ø.35'' orifice at full open)
•
35
0-35 gpm (Equivalent to Ø.49'' orifice at full open)
•
50
0-50 gpm (Equivalent to Ø.56'' orifice at full open)
•
Custom ranges are available upon request
•
Voltage
12 & 24 VDC
•
Construction
Cage, body and spool: Steel, exposed parts plated
•
Motor housing assembly: Anodized aluminum
•
Seal Material
Buna N and polyurethane standard
•
Viton optional
•
Current Draw
0.8 amp when powered at 12 volts
•
1.0 amp when powered at 24 volts
•
Internal Leakage
5 cubic inch per minute per 1000 psi
•
Temperature
-40 to 120°C
•
Operating Speed
1-48 seconds, See appendix page 1 for details
•
Cavity
Sun T-16A
•
Valve Installation Torque
65 ft-lbs
•
Cartridge Weight
F16A cartridge only = 3 lbs
•
Seal kit
SFP25675
•
Hydraulic
Symbol
Motorized Flow Control Valve
4.2 4.2
OBSOLETE USE S SERIES
Source Fluid Power - Phone: 952-368-3866 - Fax: 952-448-3392 - Sourcefp.com
Appendix 1: Motor Specification Sheet
8.1 8.1
Cable Length
Our standard cable length is 18 inches. To add additional cord length to your motorized flow control valve add
the suffix: C__ (List the cable length in inches.) Omit if not required.
Example: F1015E
C80
10182 (Cable length is specified to 80 inches.)
Wire Connectors
We offer connectors crimped onto the end of our cords. We can do other styles of connectors for customers that
require them. Consult factory. To add a standard connector to a motorized flow control add the suffix below.
WPT
Delphi Packard Weather-pack plug tower half. Pin lay out is for 2 pin connector: White wire to A terminal and
Black wire to B terminal. Pin lay out for 6 pin connector: black #1 wire to A terminal, black #2 wire to B
terminal, black #3 wire to C terminal, black #4 wire to D terminal, Green/yellow wire to E terminal and F
terminal plugged. If ordered with a B-Q motor it will come with a 2 pin connector. If ordered with a FB or S
motor it will come with a 6 pin connector.
WPS
Delphi Packard Weather-pack receptacle shroud half. Pin lay out is for 2 pin connector: White wire to A terminal
and Black wire to B terminal. Pin lay out for 6 pin connector: black #1 wire to A terminal, black #2 wire to B
terminal, black #3 wire to C terminal, black #4 wire to D terminal, Green/yellow wire to E terminal and F
terminal plugged. If ordered with a B-Q motor it will come with a 2 pin connector. If ordered with a FB or S
motor it will come with a 6 pin connector.
DT04
Deutsch connector, 2 pin receptacle. Pin layout is white wire to #1 terminal and black wire to #2 terminal.
DT06
Deutsch connector, 2 pin plug. Pin layout is white wire to #1 terminal and black wire to #2 terminal.
Example: F1015E
WPT
10182 (2 pin weather pack tower connector).
Special Flow Ranges
Valves can be supplied with different metering slots to fit special applications. Contact the factory for details and
pricing.
Ordering Example
F10
15
E
C80
WPT
10182
F10
= Motorized flow control, 10-2 cavity size
15
= Gallons per minute at full open and 100 psi pressure differential.
E
= Motor speed, 7 second full travel operating speed.
C80
= 80” cord length, 18 gauge cord.
WPT
= Connector type
10182
= line body manifold
Source Fluid Power - Phone: 952-368-3866 - Fax: 952-448-3392 - Sourcefp.com
Appendix 2 Motorized Control Valve Options
8.2 8.2
Source Fluid Power - Phone: 952-368-3866 - Fax: 952-448-3392 - Sourcefp.com
Motorized Control Valve Accessories
Double Pole- Double Throw Toggle Switch
44269
- Reversing metal toggle switch DPDP momentary ON-OFF-
•
MOM ON
44214
-
Toggle boot for toggle switches
•
Extension cable
SFP25657C-__FT
(List the cable length in feet). This extension cable
•
is for use between our FB or S series motorized control valves and one
of our control boxes. It includes WPT and WPS connectors on each end.
The cable is housed in a abrasion resistant covering. This is to be used in
conjunction with a WPT connector order on a FB or S series valve.
Seal kits -
Replacement seal kits for the wet end (nose portion) of the
motorized control valves
SFP25247
- Seal kit for the motorized flow control in the F10 size
•
SFP25148
- Seal kit for the motorized pressure control in the P10/PP10
•
size
SFP25674
- Seal kit for the motorized flow control in the F13A size
•
SFP25249
- Seal kit for the motorized flow control in the F16 size
•
SFP25675
- Seal kit for the motorized flow control in the F16A size
•
SFP25662
- Seal kit for the motorized flow control in the FPC16 size
•
SFP25673
- Seal kit for the motorized flow control in the F20 size
•
Special Seals / Material
Optional Viton seals are available on special order.
•
Stainless steel valves are suitable for use with water or other fluids and
•
are also available on special order.
Specialty valves
We take pride in innovation and creative solutions to meet customer
•
needs. This catalog is only a sample of unique solutions that we have
delivered. We can customize any one of these valves to best fit the
customers needs.
8.3 8.3
